Electromagnetic interference can cause lasting disruptions to the operation of electrical equipment. Shielded cables protect signal lines from these interfering influences, but only until they enter an enclosure or control cabinet. At these critical transitions, it is the cable gland’s job to protect the exposed lines inside the enclosure from electromagnetic waves. It dissipates these waves through the housing surface, thereby using the Faraday cage principle to protect the wiring and internal components.
Component manufacturers use a wide variety of techniques for EMC protection. However, a clamping element integrated into the cable gland has proven its value by ensuring complete contact with the shielding braid. HUMMEL’s HSK-M-EMC-D cable gland also follows this principle. When the union nut is tightened, the metallized clamping body is secured to the shield all the way around.
The advantage: this design also supports dynamic applications!
There can be no gaps in the connection due to assembly errors or material fatigue. Permanent 360⁰ protection is guaranteed. In addition, assembly time for the premium HSK-M-EMC-D threaded connection is significantly shorter.
With conventional systems, the shielding must be laboriously separated, adjusted and precisely secured. With the clamping insert principle, it is not even necessary to separate the shielding. The cable is stripped in the relevant area, and the cable gland with the integrated clamping element is positioned and tightened!
The HSK-M-EMC-D is certified according to UL, cUL and NEMA. This is important for all machine and plant manufacturers serving the North American market. UL certification is virtually mandatory there, because without UL there is no insurance coverage. Plant manufacturers have clear advantages if they can present certificates for all their components and assemblies. This saves time and costs on site when commissioning machines. NEMA protection classes are only partially comparable to the European concept of IP protection classes. NEMA distinguishes between indoor and outdoor applications. This is why machine manufacturers need to pay very close attention! An indoor certificate for a component is of little use if the system will later be outdoors.
HUMMEL EMC cable glands are available with Metric, NPT and PG thread types. EX versions for potentially explosive atmospheres are also available. The cable glands meet IP68 / IP 69K protection ratings.
Contact HUMMEL for more details!



